Sliding Door Screen Repair
If you have ever really looked at your sliding patio screen door, you would realize right away it doesn’t slide. It is actually situated on plastic wheels that are quite small. They tend to wear out over time, and when this occurs, it’s going to drag making it difficult to move.
If you want to prevent this from happening there are some things you can do. You can actually replace all of those wheels and just about an hour. As long as you take the time to clean the track, it will work just fine. Adjust the wheels and If you notice, once you are done, that it is still dragging, you probably have another broken wheel and it might be time to replace the mall. When you need a professional to handle it for you, Santa Rita Drywall Repair can meet all your drywall and sliding door repair needs.
Things To Remember!
The first thing you should do is look at the tracks, not only at the bottom but on the top. You can use pliers, a hammer, and a little block of wood to get everything back to normal.
Cleaning the tracks is a good idea. Even if you put new rollers in, they are going to wear out quickly if they are in the midst of sand or dirt.
The corner assembly screws can also be accessed quickly, and this can be done with the screwdriver, making sure everything is tight.
Check out the top of the door. Remember, there are wheels at the top and the bottom. The ones on top of the sliding door tend to be just fine, but you still need to replace them if they were out.
Sliding Door Screen Repair With Simple Steps!!!
Step 1: What you need to do initially is take out the screen door, directly out of the frame. You will notice how flexible they are, as well as the rollers, that you can lift up from the bottom and tilt it right out.
Step 2: There are different types of sliding door screen replacement material that you can use, some of which are made of wire, and also fiberglass. You can get a roll of this material that could be charcoal in color, or it may just be black or white.
Step 3: Screwdrivers are very useful for this type of sliding door repair job, plus you can use an old spline material, being very careful not to bend the edges of the groove. After you have taken off the old screen, you will want to begin cleaning the door frame.
Step 4: You should have a fiberglass screen roll that you can place on the door, and then begin to unwind, right along the edges. Just start at any of the corners, and with a spline roller, use the concave events, so that you can push the screen into the groove.
Step 5: Once in place, use the spline roller to get everything just right, and you can do this with the convex end or just use a simple utility knife which can also cut off excess material.
Premium Sliding Doors Are Available
If your screen door came with your home, it might not be one of the better units. They tend to be less expensive, and they can break down quickly. If you want to repair it, or simply make it work better, you can easily bend it into place, or you could simply purchase a premium sliding door. These are much they care about, made of extruded aluminum, and there are many styles to choose from that will have a stick metal design with rigid corners. You will also notice that the wheels are made from high-quality material, which is why they will slide much more easily. For about $120 you can get this (which is $20 more than what would originally have been a standard sliding door replacement model).
